The Art of wire - Lilian's on-line class- www.craftEdu.com
Lilian Chen
will introduce an innovative method to form a pair of 3D style ear wires in a
non-traditional manner. The class will split into three individual parts so you
will thoroughly understand the working process of the design. You will finish
two pairs of earrings.
-
6 Pendants,
Light Topaz ,
18,0 x 17,5 mm,
Article 6228
-
2 Pendants,
Amethyst ,
14,4 x 14,0 mm,
Article 6228
-
10 Pendants,
Crystal METLGTGO2X,
6,0 mm,
Article 6428
-
2 Pendants,
Fern Green ,
8,0 mm,
Article 6428
Lilian’s wire
making Theory and Method Stretch and strength
are very important part for my wire project. The advantages from its natural
curve can be extended to its Horizontal and Vertical positions.
Working
process
We are going to
make both earrings at the same time. Cut 2.5 circles form spool, to bend the
wire, tightening the angle. Fold
it until it meets its counterpart and the two halves are parallel to each other.
I use the in Vertical position to form a triangle shape by bend the wire against
its natural curve. Then, use the Horizontal method to form the shape to the second
layer. For
step by step, I will split this earring working process into three parts.
Single
piece making-> a pair piece making -> a complete pair with crystal pendants.
